Gr9
Facebook
Twitter
LinkedIn
Description
Scope of supply for Aviation Group
Forgings, round rods, steel plates, rings, seamless pipes, steel plates/steel belts, capillaries, wire welding materials, welcome to inquire!
Titanium forgings. Custom
titanium rods according to the drawings. Φ(8-400) ×L≤5000mm (rolled rods, forged rods)
titanium plate/belt (0.3-60.0) × (400-1000) × (1000-3500) mm (cold rolled plate, hot rolled plate)
titanium tube Φ(3-210) × (0.2-10.0) ×L (rolled pipes, extruded pipes)
titanium ring Outer diameter φ(100-1200) × inner diameter Φ(100-1000) × height (20-800) mm
titanium round cake Φ(150-1200) × (20-800) mm
titanium wire Φ(0.1-7.0) ×L
1. Introduction to Gr9 materials
Gr9 titanium alloy is a low alloying near-alpha titanium alloy. It has a nominal component of Ti-3Al-2.5V. It is developed as a cold-processable pipe application. It has good cold forming and welding properties. It has room temperature strength of 20% to 50% higher than that of industrial pure titanium and has good corrosion resistance in many media. Gr9 welding and cold forming properties are better than TC4 alloys.
Gr9 titanium alloy seamless pipe is suitable for aircraft and engine hydraulic and fuel pipeline systems, and has been used in various military and civilian aircraft and aerospace applications. Therefore, TA18 titanium alloy has become the most suitable material for making high-pressure lightweight conduits on aircraft with its excellent comprehensive performance, and has become the most suitable material for making high-pressure lightweight conduits on aircraft.
2. Technical standards of Gr9 materials
GB/T3620.1-2016 Titanium and Titanium Alloy Grades and Chemical Compositions
GB/T 3621-2007 ASTM/B265 Titanium and Titanium Alloy Sheet
GB/T2965 -2007 ASTM/B348 Titanium and Titanium Alloy Rod Material
GB/T 3624-2010 ASTM337 Titanium and Titanium Alloy Seamless Tube
GB/T16598-2013 Titanium and titanium alloy tubes for ASTM381 heat exchanger and condenser
GB/T13810-1997 Titanium and titanium alloy processing materials for AMST/F136 surgical implants
GB/T3623-2007 AMST/B863 titanium and titanium alloy wire
AMST/B265 ASTM/B265 Titanium and Titanium Alloy Band·Foil
III. Chemical composition of Gr9
| Brand number | Chemical composition (weight percentage) | |||||||||||
| Chemicai composition(WT%) | ||||||||||||
| Gr9 | Chemical Ingredients | titanium | iron | carbon | nitrogen | hydrogen | oxygen | aluminum | vanadium | Other impurities | ||
| (Of) | (Fe) | (C) | (N) | (H) | (O) | (Al) | (V) | single | sum | |||
| Industrial pure titanium | margin | ≤0.25 | ≤0.08 | ≤0.05 | ≤0.015 | ≤0.12 | 2.0～3.5 | 1.5～3.0 | ≤0.1 | ≤0.4 | ||
IV. Gr9 physical properties
Density: 4.47g/cm³
Room temperature elastic modulus 118~123GPa,
Phase change point: 925℃,
Hardness 15~17HRC.
Gr9 titanium alloy performance specified in technical standards
| Technical standards | variety | state | Specifications/mm | Sampling direction | Room temperature performance | High temperature performance | |||||||||
| Rm/
MPa |
Rp0.2/
MPa |
A/% | α / (º) | 350℃ | 400℃ | ||||||||||
| Rm/
MPa |
S100h/
MPa |
Rm/
MPa |
S100h/
MPa |
||||||||||||
| Not less than | |||||||||||||||
| GB/T3621-2007 | Plate | M | 0.5~1.0
＞1.0~2.0 ＞2.0~4.0 ＞4.0~5.0 ＞5.0~10.0 |
LT | 590~735 | – | 25
25 20 15 15 |
100
70 60 60 |
340 | 320 | 310 | 280 | |||
| GJB 3423a-2008 | Pipe | M | Outer diameter: >8~52 | LT | 620 | 515 | 15 | – | – | – | – | – | |||
| GB/T26058-2010 | Pipe | R | 25~210 | LT | Actual test | Actual test | Actual test | – | – | – | – | – | |||
V. Gr9 application fields
- Gr9 titanium alloy seamless pipe is suitable for aircraft and engine hydraulic and fuel pipeline systems, and has been used in various military and civilian aircraft and aerospace applications.
- Gr9 titanium alloy has become the ideal material for making high-pressure lightweight conduits on aircraft with its excellent comprehensive performance. Become the ideal material for making high-pressure lightweight conduits on aircraft.
