High-performance alloy material for industrial engineering and critical application conditions.
| Place Of Origin: | China Jiangsu | Certification: | CE,ROHS |
| Material: | Monel | Nickel(Min): | 63% |
| Curie Temperature | 21-49℃ | Density: | 8.05g/Cm3 |
| Application: | Anti-Corrosion | Condition: | Hard / Soft |
| Sureface: | Bright,Oxided | Delivery Time: | 7-50 Days |
| Melting Point: | 1288-1343℃ | Name: | Monel K500 Strip |
| Packaging Details: | Spool Package With Carton Box, Coil Package With Polybag | Supply Ability: | 500 Tons Per Month |
| Highlight: | Copper Nickel Alloy K500 Strip,Monel Material Copper Nickel Alloy,Anti Corrosion Monel Alloy | ||
Monel K500 strip, also referred to as Monel UNS No5500 Sheet is an age hardened Nickel Copper based alloy. 2.4375 Monel K500 Shim Sheet is an alloy which combines the corrosion resistance properties of Alloy 400 with an increase in its properties, namely – high strength corrosion fatigue and erosion resistance. MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminium and titanium. MONEL K500 has excellent corrosion resistant characteristics. These characteristics are similar to Monel 400.
When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.
This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling orbright dipping in acid can remove this magnetic film and restore the non-magnetic properties.
| Ni | Cu | Al | Ti | C | Mn | Fe | S | Si |
|---|---|---|---|---|---|---|---|---|
| 63 Max | 27-33 | 2.3-3.15 | 0.35-0.85 | 0.25 max | 1.5 max | 2.0 max | 0.01 max | 0.50 max |
Sour-gas service applications
Oil and gas production safety lifts and valves
Oil-well tools and instruments like drill collars
Oil well industry
Doctor blades and scrapers
Chains, cables, springs, valve trim, fasteners for marine service
Pump shafts and impellers in marine service
