High-performance alloy material for industrial engineering and critical application conditions.
| Place Of Origin: | China Jiangsu | Certification: | CE,ROHS |
| Material: | Nickel Copper | Nickel(Min): | 63% |
| Curie Temperature: | 21-49℃ | Density: | 8.05g/Cm3 |
| Application: | Anti-Corrosion | Condition: | Hard / Soft |
| Sureface: | Bright,Oxided | Delivery Time: | 7-50 Days |
| Melting Point: | 1288-1343℃ | Name: | Monel K500 Wire |
| Packaging Details: | Spool Package With Carton Box, Coil Package With Polybag | Supply Ability: | 500 Tons Per Month |
| Highlight: | Nickel Copper Alloy Monel 400 Astm,Monel Alloy Wire 0.5mm,Monel Alloy 400 Wire | ||
Monel 400 wire is produced and manufactured by dlx alloy with a wide range of Monel 400 wire size. It is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.
This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.
| Ni | Cu | Al | Ti | C | Mn | Fe | S | Si |
|---|---|---|---|---|---|---|---|---|
| 63.0-70.0 | 27-33 | 2.30-3.15 | .35-.85 | 0.25 max | 1.5 max | 2.0 max | 0.01 max | 0.50 max |
Sour-gas service applications
Oil and gas production safety lifts and valves
Oil-well tools and instruments like drill collars
Oil well industry
Doctor blades and scrapers
Chains, cables, springs, valve trim, fasteners for marine service
Pump shafts and impellers in marine service
