Search

×
Home » product » TA18

TA18

High-performance alloy material for industrial engineering and critical application conditions.

Product Details

Scope of supply for Aviation Group

Forgings, round rods, steel plates, rings, seamless pipes, steel plates/steel belts, capillaries, wire welding materials, welcome to inquire!

Titanium forgings, custom titanium rods per drawings. Φ(8-400) ×L≤5000mm (rolled rods, forged rods)

Titanium plate/belt (0.3-60.0) × (400-1000) × (1000-3500) mm (cold rolled plate, hot rolled plate)

Titanium tube Φ(3-210) × (0.2-10.0) ×L (rolled pipes, extruded pipes)

Titanium ring Outer diameter φ(100-1200) × inner diameter Φ(100-1000) × height (20-800) mm

Titanium round cake Φ(150-1200) × (20-800) mm

Titanium wire Φ(0.1-7.0) ×L

 

1. Introduction to TA18 materials

TA18 is a low-alloy near-alpha titanium alloy with nominal composition Ti-3Al-2.5V, developed specially for cold-formable tubing. It features excellent cold forming and welding performance, its room-temperature strength is 20%~50% higher than commercially pure titanium, and it possesses reliable corrosion resistance in various media. TA18 outperforms TC4 alloy in weldability and cold workability.

TA18 seamless titanium tubes are designed for hydraulic and fuel pipeline systems of aircraft and aero-engines, widely adopted on all types of military and civil aerospace aircraft. Thanks to its outstanding comprehensive performance, TA18 is the preferred material for lightweight high-pressure aircraft conduits.

 

2. Technical standards of TA18 materials

GB/T3620.1-2016 Titanium and Titanium Alloy Grades and Chemical Compositions

GB/T 3621-2007 ASTM/B265 Titanium and Titanium Alloy Sheet

GB/T2965 -2007 ASTM/B348 Titanium and Titanium Alloy Rod Material

GB/T 3624-2010 ASTM/B337 Titanium and Titanium Alloy Seamless Tube

GB/T16598-2013 ASTM/B381 Titanium & titanium alloy tubes for heat exchanger and condenser

GB/T13810-1997 ASTM/F136 Titanium and titanium alloy processing materials for surgical implants

GB/T3623-2007 ASTM/B863 titanium and titanium alloy wire

ASTM/B265 Titanium and Titanium Alloy Strip & Foil

 

3. Chemical composition of TA18

Brand Chemical composition (wt%)
Ti Fe C N H O Al V Single impurity Total impurities
TA18 Bal ≤0.25 ≤0.08 ≤0.05 ≤0.015 ≤0.12 2.0~3.5 1.5~3.0 ≤0.10 ≤0.40

 

4. TA18 physical properties

Density: 4.47g/cm³

Room temperature elastic modulus: 118~123GPa

Phase transformation temperature: 925℃

Hardness: 15~17HRC

Standard specified mechanical properties of TA18 titanium alloy

Standard Product form Delivery state Specifications/mm Sampling direction Room temperature mechanical properties High temperature mechanical properties
Rm/MPa Rp0.2/MPa Elongation A/% Bending angle α/(°) 350℃ 400℃
Rm/MPa σ100h/MPa Rm/MPa σ100h/MPa
Minimum required value
GB/T3621-2007 Plate M 0.5~1.0
>1.0~2.0
>2.0~4.0
>4.0~5.0
>5.0~10.0
LT 590~735 – 25
25
20
15
15
100
70
60
60
60
340 320 310 280
GJB 3423A-2008 Tube M Outer diameter: >8~52 LT 620 515 15 – – – – –
GB/T26058-2010 Tube R 25~210 LT Test on actual product Test on actual product Test on actual product – – – – –

 

5. TA18 application fields

  1. TA18 seamless titanium tubes are used for hydraulic and fuel pipeline systems of aircraft and aero-engines, widely applied in all military and civil aerospace aircraft.
  2. With excellent comprehensive performance, TA18 serves as ideal lightweight high-pressure conduit material for aviation aircraft.
Inquiry

Please fill in your name, email and message below. We will read your information carefully and reply to you as soon as possible. Thank you for your contact and support.