High-performance alloy material for industrial engineering and critical application conditions.
Scope of supply of Aviation Group:
It can be customized non-standard, aluminum plate (whole plate/cut), aluminum rod, aluminum forgings, aluminum tubes, aluminum profiles, etc. Welcome to inquire!
5A02 is an Al-Mg-based anti-rust aluminum alloy and cannot be strengthened by heat treatment. The alloy has a low magnesium content, high plasticity, good forming, and low strength, but higher strength than 3A21 alloy. Cold deformation can increase its strength while reducing plasticity. The alloy has good corrosion resistance and is suitable for use in marine environments, and the alloy has good welding properties.
| Alloy Medal | Silicon Si | Iron Fe | Copper Cu | Manganese Mn | Magnesium Mg | Titanium Ti | other | Aluminum AL | ||
| New grade | Old brand | 0.40 | 0.40 | 0.10 | 0.15-0.40 | 2.0-2.8 | 0.15 | Each | total | margin |
| 5A02 | LF2 | 0.05 | 0.15 | |||||||
| Aluminum alloy grade and status | tensile strength Rm/Mpa | Yield strength Rp0.2/Mpa | Elongation/% | Hardness/HBWα | density (20℃) (g/cm3) |
| 5A02-H32 | 210-260 | 130 | 5 | 61 | 2.73 |
5A02 alloy is suitable for welding structures and containers with high process plasticity requirements and corrosion resistance, such as conduits, oil tanks, GIS high-pressure switch shells, flanges, rivets or welding rods, etc., and wires are used to make rivets.
