GH4049

카테고리
Facebook
트위터
LinkedIn

설명

항공 그룹에 대한 공급 범위

단조품, 원형 막대, 강판, 링, 이음매없는 파이프, 강판 / 스틸 벨트, 와이어 용접 재료, 문의 환영합니다!

1. Introduction to GH4049 Materials

      GH4049 alloy is a Ni-Co-Cr-based precipitation hardened deformation high-temperature alloy, used at below 950 degrees Celsius. This alloy has good oxidation resistance below 1000 degrees Celsius and has a high high temperature strength below 950 degrees Celsius. Compared with nickel-based alloys of similar purposes, the alloy has poor thermal processing plasticity. It can improve its processing plasticity after electroslag remelting or vacuum arc remelting. This alloy is suitable for the manufacture of gas turbine blades with operating temperatures between 850-950°C.

Materials Technical Standards

      GB/T14992 Classification and grade of high-temperature alloys and intermetallic compounds

      GB/T14993 Specification for hot rolled rods for rotating components

      GJB1953A Specification for hot rolled bars for high-temperature alloys for rotating parts of aircraft engines

      HB/Z140 Aviation high-temperature alloy heat treatment process

2. Chemical composition of GH4049

합금 % C Cr In Al Of V W Mo Fe cerium

Ce

B S P 그리고 Mn
Gh4049/gh49 최소값 9.50 margin 3.7 1.4 0.200 5.0 4.5
최대 값 0.10 11.0 4.4 1.9 0.500 6.0 5.5 1.50 0.020 0.025 0.010 0.10 0.50 0.50

3. GH4049 physical properties

밀도  g / cm3 8.44
녹는점  1320-1390
Magnetic performance Alloy is non-magnetic

Minimum value of mechanical properties of GH4049 alloy at room temperature:

합금 상태 인장 강도 수율 강도
RP0.2 N/mm
신장 브리넬 경도
Rm N/mm A5 % HB
고체 용융 상태 ≥570 ≥275 ≥8.0 ≤363

 4. GH4049 application fields

      GH4049 is suitable for gas turbine working blades with operating temperatures of 850-950℃, and this is the most widely used.

      Used to manufacture aircraft engine turbine blades and other high-temperature bearing workpieces.

      Forgings can be used to manufacture structural parts for marine gas engines and military equipment.

맨 위로 스크롤