2A12
Descrizione
Ambito di fornitura del Gruppo Aviation:
Può essere personalizzato non standard, piastra di alluminio (piastra intera / taglio), asta di alluminio, forgiati di alluminio, tubi di alluminio, profili di alluminio, ecc. Benvenuti a chiedere informazioni!
1. Introduzione a 2A12 I materiali
2A12 aluminum alloy Al-Cu-Mg aluminum alloy, main features and application range: This is a hard aluminum, which can be strengthened by heat treatment. It has medium plasticity in quenching and rigid quenching states, good spot welding, and tends to form intergranular cracks when using gas welding. The alloy has good cutting performance after quenching and cold hardening, and has low machinability after annealing: low corrosion resistance, and often uses male oxidation treatment and paint coating methods or an aluminum coated layer on the surface to improve its corrosion resistance.
Standard: GB/T 3191-2010 Replaces old GB/T 3191-1998
2. 2A12 composizione chimica
| Medaglia in lega | Ferro Fe | Copper Cu | Manganese Mn | Magnesium Mg | Zinc Zn | Titanio Ti | Nickel Ni | altro | Aluminum AL | ||
| Nuovo grado | Vecchio marchio | 0.50 | 3.8-4.9 | 0.3-0.9 | 1.2-1.8 | 0.30 | 0.15 | 0.10 | Ciascuno | totale | |
| 2A12 | LY12 | 0.05 | 0.10 | margine | |||||||
3. 2A12 mechanical properties and status
| Grado e stato della lega di alluminio | resistenza alla trazione
Rm/Mpa |
Rendimento del rendimento
Rp0,2/Mpa |
Allungamento/% | Durezza/HBWα | densità
(20℃) (g/cm3) |
| 2A12-T4 | 425 | 275 | 12 | 120 | 2.8 |
The status of 2A12 is: T4, T3, T351, T451, H112
IV. 2A12 application fields
- 2A12 aluminum is mainly used for machine appearance parts structure, molds, transportation vehicles, compressors, rivets, truck hubs, spiral components and various other structural parts.
- It is mainly used to make various high-load parts and components (but not stamping forgings) such as skeleton parts on aircraft, skins, partitions, ribs, spars, rivets, etc., working parts below 150℃.
