310S

L'offre de notre société comprend

Pièces forgées non standard, barres rondes, plaques/ceintures en acier, raccords de tuyauterie à bride, tuyaux sans soudure, capillaires, etc. N'hésitez pas à vous renseigner !

1. Introduction to 310S materials

      310S stainless steel is austenitic chromium-nickel stainless steel, corresponding to the grade ASTM SA213/TP310S.

      310S stainless steel has good high temperature resistance. The melting point of 310S is 1470℃, but when the temperature exceeds 800℃, it begins to soften, the allowable stress begins to continue to decrease, and the maximum operating temperature is 1200℃, which can be continuously operated at high temperatures.

      310S has high nickel and chromium content, and has good oxidation resistance and corrosion resistance, making it much better creep strength. It has good oxidation resistance, corrosion resistance, acid and alkali resistance, and high temperature resistance. High temperature resistance steel pipes are specially used in the manufacturing of electric furnace pipes and other occasions. After the carbon content is added to the austenitic stainless steel, the strength is improved due to its solid solution strengthening effect. The chemical composition characteristics of austenitic stainless steel are the addition of molybdenum, tungsten, niobium and titanium based on chromium and nickel. Since its structure is a face-centered cubic structure, it has high strength and creep strength at high temperatures.

2. 310S chemical composition

3. 310S mechanical properties

Hardness (HB): ≤187

Tensile strength (бb)(Mpa): ≥515

Yield strength (σs) (Mpa): ≥205

Élongation (δ)% : ≥35

Area reduction (ψ)%: ≥50

1. Recommended heat treatment system: 1030 degrees Celsius-1180 degrees Celsius, quench cold;
2. Mechanical properties include () Tensile strength: not less than 520; (2.) Provisional non-proportional extension strength: not less than 205; (3.) Elongation after break: not less than 35;

4. 310S application fields

      Largement utilisé dans les secteurs du pétrole, de l'électronique, des produits chimiques, de la médecine, des textiles légers, de l'alimentation, des machines, de la construction, de l'énergie nucléaire, de l'aérospatiale, de l'industrie militaire et d'autres industries.