Tubo de tántalo
Facebook
Twitter
LinkedIn
Descripción
1. Introduction to Tantalum Tube
- Número de grado: RO5200, RO5400
- Specifications: Diameter: 0~150mm, Wall thickness: 0.1~5mm, Length: 10mm~6000mm
- Delivery status: Cold rolled glossy surface (hard state, annealed state)
- Form: straight pipe, coil pipe
- Purity: ≥95%, 99.99%
- Standard: ASTM B521, GB/T8182
- Cold rolling, pickling, shearing
- Density: 16.67g/cm3
- Melting point: 2996℃
2. Application fields of Tantalum Tube
Tantalum tube Tantalum tube High-purity tantalum tube thick-wall tantalum tube application: used for heat exchanger in the acid production industry, protective pipes and pipelines in the chemical industry, etc.
Third, chemical ingredients
<td<td<td<td<td<td
| Ingredients (%) | |||||||||||||
| Número de marca | Ingredientes principales | Contenido de impurezas (≤) | |||||||||||
| Frente a | Nb | Fe | Y | En | W | Mo | De | Nb | O | C | H | N | |
| Ta1 | Remaining | - | 0.005 | 0.005 | 0.002 | 0.01 | 0.01 | 0.002 | 0.03 | 0.015 | 0.01 | 0.0015 | 0.005 |
| TA2 | Remaining | - | 0.03 | 0.02 | 0.005 | 0.04 | 0.03 | 0.005 | 0.1 | 0.02 | 0.01 | 0.0015 | 0.005 |
| Tanb3 | Remaining | 1.5～3.5 | 0.03 | 0.03 | 0.005 | 0.04 | 0.03 | 0.005 | - | 0.02 | 0.01 | 0.005 | 0.01 |
| TaNb20 | Remaining | 17.0～23.0 | 0.03 | 0.03 | 0.005 | 0.04 | 0.03 | 0.005 | - | 0.02 | 0.01 | 0.005 | 0.01 |
| TaNb40 | Remaining | 35.0～42.0 | 0.01 | 0.005 | 0.01 | 0.05 | 0.02 | 0.01 | - | 0.02 | 0.01 | 0.015 | 0.01 |
| TA2.5W | Remaining | - | 0.01 | 0.005 | 0.01 | 2.0～3.5 | 0.01 | 0.002 | 0.1 | 0.01 | 0.01 | 0.0015 | 0.01 |
| Ta10W | Remaining | - | 0.01 | 0.005 | 0.01 | 9.0～11.0 | 0 | ||||||
4. Mechanical properties:
| Número de marca | Resistencia mínima a la tracción (MPa) | Límite elástico mínimo (MPa) | Elongation, minimum, % (25.4mm gauge distance) |
| RO5200 ， RO5400 | 207 | 138 | 25 |
| Ro5252 | 276 | 193 | 20 |
| Ro5255 | 481 | 414 | 15 |
| RO5240 | 276 | 193 | 20 |
Tolerance of outer diameter and wall thickness of tantalum tube (mm):
| Outer diameter | Outer diameter tolerance | Wall thickness tolerance |
| 1～20 | 0.01 | ±5% |
| 20～25 | 0.05 | ±5% |
| 25～40 | 0.10 | ±5% |
| 40～60 | 0.15 | ±5% |
| 60～80 | 0.20 | ±5% |
| 80～150 | 0.25 | ±5% |
